After finishing your plan, in the luminaire mode you can now, in the next step, plan the lighting. anning. The first control function "Activities" lists all the options for inserting luminaires.
- Draw a rectangular arrangement
- Draw a polygonal arrangement
- Draw a circular arrangement
- Draw a linear arrangement
- Position a single luminaire
- Automatic arrangement for defined areas
Of course you can position luminaires directly in your project using the "drag & drop" function.
If you do not wish to use the luminaires which have been inserted, you can simply replace them by selecting the function "Exchange selected luminaires" or "Exchange all luminaires of this type". To do this mark the appropriate luminaires in the CAD view.
You can plan your lighting using all the usual luminaire formats such as Eulumdat, IES, CIBSE, LTLI. Just use the import function "Import luminaire file".
In the control function "Active luminaire" the luminaire with which you last worked is displayed. With the "Select" button you come to the history of the luminaire. If luminaires have already been used, a list of the luminaires which were last used will be shown. Clicking with the right mouse button on a luminaire image will open the appropriate context menu. Here the data sheet of the luminaire can be displayed, if required, or the luminaire itself can be marked as a favourite or it can be deleted from the history. The data sheet of the luminaire can also be shown in the luminaire comparison. An external window, independent of evo , is opened. Here you have the opportunity to have an overview of a comparison of a large number of luminaires. If a luminaire is marked as a favourite, you will always find this in the tab "Favourites", whatever the project being used. The next tab "Catalogues" leads you to the luminaire catalogues which have been installed. You can also call up our project partners via "further catalogues...". You will automatically be forwarded to the manufacturer mode.
Below the active luminaire you will find all photometric data. The luminaire which was last selected or which is in the CAD view is always defined as "active". If you mark a luminaire in CAD, then other details will be shown as well as the photometric data. You require these details in particular when you wish to manually adjust the position, the assembly, the photometric values of the luminaire, maintenance data or even energy consumption.
Here you can access not only history, favourites and catalogues but also the folders which you have generated for luminaires.
You can generate and define theses folders yourself and then import them into evo by clicking on "Add folder... ".
After you have added a folder, you can open it in a separate window with a double click.
On the left hand side all the sub-folders are listed which you can select individually.
For this purpose the luminaires included in each of the folders selected are listed on the right hand side .
The same principle is found in the "Furniture and object tool".
There, as in the luminaire tool, you can also add your own folders for furniture and objects.
The lamp tool provides support when modifying an active luminaire. If you have not selected a luminaire in the CAD view, then an explanatory text appears below the control. As soon as a luminaire is marked, the complete control field opens. Here you can adjust not only the luminous flux but also the power and colour temperature of the original fitting and also the spectrum. In addition it is also possible to change the type of lamp. A list of the usual alternatives is available in the drop down menu.
After adjusting manually you only need to click on the button "Adopt" and the new fitting will be included in your planning.
If the luminaire model being used has one or more joints, then this is indicated by a symbol next to the manufacturer's logo. The editing of the joints in accordance with their possible alignment is done either graphically in the CAD view or manually in the input box. Please note that the lumianire must previously have been selected in CAD in order to switch all the buttons into active mode. The alignment is made visible by means of a rotation symbol along the axis. If you wish to set a focal point directly, then use the control "Set focal point" and select a point in the CAD. The alignment of the luminaire to the target selected is then automatic. You can align the luminaire according to all variants starting from C0 G0. By clicking on both buttons you will be led to the next variant without having to make any graphic or manual preparations. If you wish to reset to the original position of the rotation of the joint, then activate the "Reset angle " function. The joint will then be rotated to the starting position.
With the filter tool you can furnish your luminaire with different colour filters, correction or other filters. To do this, select one or more luminnaires with the mouse and select the filter desired either from those last used, from your favourites or from the DIAL filter catalogue. The tool shows you the filter spectrum and the spectrum resulting from the filter spectrum and the lamp spectrum. With the 'slider' you can determine how large the area should be which is covered by the filter. The RA value can be seen below the resulting spectrum. Values from R1 to R14 fade in when you move the mouse over the comparison colours. Here you can remove a colour filter which has been inserted or adopt the current selection.
Until you press the button "Adopt" the luminaire you have selected
will not be changed and so no colour filter will have been inserted.
In the course of your planning you acquire an overview of how high the current energy consumption of your installation is or how much energy can be saved. To do this select the option "Display energy tachometer" in [Light-> Properties tachometer] or select the appropriate option in display options. In addition you can set whether the LENI(kWh/a/m2) value, the energy consumption (kWh/a) or the costs should be displayed in the tachometer. In all displays it is possible to set a limit which then becomes a limit value in the tachometer. For the costs you can also select a currency. In the energy tool all three values are displayed next to each other. In the energy tool an energy sensor can also be inserted which takes into account energy saving according to EN 15193. Indicate whether constant lighting control is available and what kind of presence sensors are used. The energy tacho itself can be seen below the CAD window until it is deactivated by the user. The tachometer can either take into account the whole project("Whole") or only the current scene visible in the CAD window ("Current scene"). In this way it is possible to evaluate and plan single rooms or floor levels. The tachometer also displays the spectrum of possible energy saving through daylight which is why the display shows a minimal value for maximum saving through daylight and a maximum value without saving through daylight. Calculation is in accordance with EN 15193.
Data for the period of use of light are gathered from the user profile which you can set for each area. The geographical and geometrical information is gathered from the project itself.
Remember to indicate latitude and longitude in the site tool.
This information is necessary for calculation according to EN 15193.